Timer There are 14 products.

Subcategories

• 

  H3BA-N

  Solid-state Timer with Valuable Multiple-time

  Ranges and Multiple-operating Modes
  • Handles a wide range of applications through six operating modes.
  • With H3BA-N8H models, the output type can be switched between time-limit DPDT and

  time-limit SPDT + instantaneous SPDT using a selector.
  • Setting rings (order separately) to enable consistent settings and to limit the setting range.
  • Panel Covers (order separately) to enable various panel designs.
  • Conforms to LR and approved by UL and CSA.

  

• 

  H3CR

  DIN 48 × 48-mm Multifunctional Timer Series
  • Conforms to EN61812-1 and IEC60664-1 4 kV/2 for Low Voltage, and EMC Directives.
  • Approved by UL and CSA.
  • Lloyds/NK approvals.
  • Six-language instruction manual provided

  H3CR-A

  DIN 48 × 48-mm State-of-the-art
  Multifunctional Timer
  • A wider power supply range reduces the number of timer models kept in stock.
  • A wide range of applications through six or four operating modes.
  • Reduced power consumption.(Except for H3CR-A8E)
  • Enables easy sequence checks through instantaneous outputs for a zero set value at any time range.
  • Length, when panel-mounted with a Socket, of 80 mm or less.
  • Time Setting Rings enable consistent settings and limit the setting range.
  • Panel Covers enable various panel designs.
  • PNP input models available.
  • Rich variety of inputs: Start, reset, and gate functions (11-pin models and -AP models)

  H3CR-F

  DIN 48 × 48-mm Twin Timers
  • Wide power supply ranges of 100 to 240 VAC and 48 to 125 VDC respectively.
  • ON- and OFF-times can be set independently and so combinations of long ON- or OFF-time and short OFF- or ON-time settings are possible.
  • Fourteen time ranges from 0.05 s to 30 h or from 1.2 s to 300 h depending on the model to be used.
  • Models with a flicker ON start or flicker OFF start are available.
  • Easy sequence checks through instantaneous outputs for a zero set value at any time range.
  • Length, when panel-mounted with a Socket, of 80 mm or less.
  • 11-pin and 8-pin models are available.

  H3CR-G

  DIN 48 × 48-mm Star-delta Timer
  • A wide star-time range (up to 120 seconds) and star-delta transfer time range (up to 0.5 seconds).

  H3CR-H

  DIN 48 × 48-mm Power OFF-delay Timer
  • Long power OFF-delay times;
  S-series: up to 12 seconds,
  M-series: up to 12 minutes.
  • Models with forced-reset input are available.
  • 11-pin and 8-pin models are available.

  

• 

  H3Y

  Miniature Timer Compatible with the MY Relay

  
  - Semi-multi power supply voltage.
  - Large transparent time setting knob facilitates time setting. A flat-blade and Phillips

  screwdriver can also be used for time setting.
  - Pin configuration compatible with MY Power Relay.
  - LED indication for power and output statuses.
  - Conforms to EMC standards.
  - Conforms to EN61812-1 and approved by UL and CSA.
• 

  H5CZ

  Easy to Use and Easy to Read

  Basic Features

  - Character height 10mm for better readability

  - Operation is simplified by the Up/Down Keys for each digit on 4-digit.

  Safety and Reliability

  - Power supply circuit and input circuits are isolated for safety and reliability.

  - Set value limit function prevents unxxepected operation of output devices caused by setting mistakes.

  - Output counter helps in managing the service life of the timer or the load.

  Other Features

  - Models with instantaneous contact ouput

  - Waterproof, dust-proof structure (UL508 Type 4x and IP66)

  - Key protection.
• 

  H5CX

  Ultra-compact Timer Provides Advanced Functions and Security Settings.

  Basic Features

  - Short body with depth of only 59 mm (for 24-VAC/12 to 24-VDC Models with Screw Terminals)

  - Character height of 12mm for better readability (on models with 4 digits).

  - The present value display characters can be switched between red, green, and orange.

  Safety and Reliability

  - Power supply circuit and input circuits are isolated for safety and reliability.

  - New set value limit and output counter functions have been added.

  Other Features

  - Front Panel can be changed to white or light gray

  - Models with instantaneous contact output added to the series.